Steel roofing
Trapezoid
Trapez 40 steel roofing
Trapez 40 is designed for buildings with high stability requirements. The 40 mm profile gives excellent mechanical resistance, which makes it ideal for the roofs of industrial halls, sports buildings, warehouses and other commercial buildings.
- Cover width
- 100 cm
- Minimum pitch
- 4°
- Profile height
- 40 mm
Technical data
Dimensions and use
- Profile type
- Trapezoid
- Profile height
- 40 mm
- Panel width
- 105 cm
- Cover width
- 100 cm
- Weight
- 4.87–5.85 kg/m²
- Minimum pitch
- 4°
- Sheet thickness
- 0.5 / 0.6 mm
- Suitable for
- roof, facade
Data as published; the installation instructions and the technical sheet come with your offer.
As we describe it
- Industrial trapezoid shape
- For roofs, facades, walls, ceilings and fences
- Resistant to hail
- Also with 7 cm of the edge free of felt, for faster installation
Trapez 40
Carries large loads, stays light
Its shape drains water and snow efficiently and carries large loads while keeping the weight relatively low.
Trapez 40 also suits facades, walls, ceilings and even fences, on residential and especially industrial buildings, and resists strong wind and hail.
Trapez 40 is also made with 7 cm of the edge left free of felt, for faster and simpler installation.
Colours
Colours by sheet thickness
Hot-dip galvanised, colour-coated steel in gloss or matt finishes. The range differs by thickness.
Thickness 0.5 mm
- RAL 3009dark redgloss
- RAL 3009dark redmatt
- RAL 7016anthracite greygloss
- RAL 7016anthracite greymatt
- RAL 8004brick redgloss
- RAL 8019dark browngloss
- RAL 8019dark brownmatt
- RAL 9002off-whitegloss
- RAL 9005blackgloss
- RAL 9005blackmatt
- RAL 9006silvergloss
Thickness 0.6 mm
- RAL 3009dark redgloss
- RAL 7016anthracite greygloss
- RAL 8004brick redgloss
- RAL 8019dark browngloss
- RAL 9002off-whitegloss
- RAL 9005blackgloss
- RAL 9006silvergloss
Shades on screen may differ from the real colour. Other shades can be supplied to order.
Felt
Felt for every roofing
Felt bonded to the underside of the sheet regulates humidity in the room below and prevents dripping and damage from condensation on cold metal.
It also insulates against heat and sound, resists bacteria, is rated B1 to DIN 4102 and stays firmly bonded to the sheet as it ages.
Is Trapez 40 right for your roof?
Send us the dimensions of your roof and the colour you like; we will prepare an offer with the flashings and gutters to match.