+386 2 799 00 00info@petrovic.siMon–Fri 7:00–16:00Points of saleContactBENDEX shop

Steel roofing

Trapezoid

Trapez 30 steel roofing

Trapez 30 is a durable, robust profile, 30 mm high, intended above all for higher loads and longer spans.

Cover width
103 cm
Minimum pitch
5°
Profile height
30 mm

Request a quoteCompare all profiles

Trapez 30 steel roofing

Technical data

Dimensions and use

Profile type
Trapezoid
Profile height
30 mm
Panel width
106 cm
Cover width
103 cm
Weight
4.87–5.85 kg/m²
Minimum pitch
5°
Sheet thickness
0.5 / 0.6 mm
Suitable for
roof, facade

Data as published; the installation instructions and the technical sheet come with your offer.

Dimensioned cross-section of the Trapez 30 profile
Profile drawing

As we describe it

  • Industrial trapezoid shape
  • For roofs, facades, walls, ceilings and fences
  • Resistant to hail

Trapez 30

For halls, warehouses and large roofs

Its strength and stability make Trapez 30 particularly suitable for industrial buildings, warehouses, farm buildings and larger roof areas. Its geometry drains water efficiently and resists snow, wind and other weather.

Trapezoid roofing is durable, easy to maintain and simply beautiful, and the wide choice of colours means you do not have to compromise.

House with Petrovič Trapez 30 roofing

Colours

Colours by sheet thickness

Hot-dip galvanised, colour-coated steel in gloss or matt finishes. The range differs by thickness.

Thickness 0.5 mm

  • RAL 3009dark redgloss
  • RAL 3009dark redmatt
  • RAL 7016anthracite greygloss
  • RAL 7016anthracite greymatt
  • RAL 8004brick redgloss
  • RAL 8019dark browngloss
  • RAL 8019dark brownmatt
  • RAL 9002off-whitegloss
  • RAL 9005blackgloss
  • RAL 9005blackmatt
  • RAL 9006silvergloss

Thickness 0.6 mm

  • RAL 3009dark redgloss
  • RAL 7016anthracite greygloss
  • RAL 8004brick redgloss
  • RAL 8019dark browngloss
  • RAL 9002off-whitegloss
  • RAL 9005blackgloss
  • RAL 9006silvergloss

Shades on screen may differ from the real colour. Other shades can be supplied to order.

Felt

Felt for every roofing

Felt bonded to the underside of the sheet regulates humidity in the room below and prevents dripping and damage from condensation on cold metal.

It also insulates against heat and sound, resists bacteria, is rated B1 to DIN 4102 and stays firmly bonded to the sheet as it ages.

Colours and protection

Felt on the underside of profiled roofing

Is Trapez 30 right for your roof?

Send us the dimensions of your roof and the colour you like; we will prepare an offer with the flashings and gutters to match.