Steel roofing
Tile look
LUX steel roofing
Modern building and renovation call for a roof that completes the look of the building and lasts with minimal maintenance. LUX combines an attractive appearance with top quality, and its dense profile and special production technique make it exceptionally strong.
- Cover width
- 116 cm
- Minimum pitch
- 8°
Technical data
Dimensions and use
- Profile type
- Tile look
- Profile height
- on enquiry
- Panel width
- 120.3 cm
- Cover width
- 116 cm
- Weight
- 4.50–5.10 kg/m²
- Minimum pitch
- 8°
- Sheet thickness
- 0.5 / 0.6 mm
- Suitable for
- roof
Data as published; the installation instructions and the technical sheet come with your offer.
As we describe it
- Suitable for residential buildings
- Resistant to hail
- Very strong profile
- Classic installation or modular installation in short pieces
LUX
Safety and elegance for new and renovated houses
LUX adds the highest degree of safety and elegance to any building and suits new builds and renovations alike.
You can install LUX in two ways. In the classic installation we make the panels in lengths that fit your roof. In the modular installation, shorter pieces are joined along the length of the roof, which makes transport easier and installation simpler.
LUX was our first roofing that customers could order in short pieces packed on a pallet.
Colours
Colours by sheet thickness
Hot-dip galvanised, colour-coated steel in gloss or matt finishes. The range differs by thickness.
Thickness 0.5 mm
- RAL 3009dark redgloss
- RAL 3009dark redmatt
- RAL 7016anthracite greygloss
- RAL 7016anthracite greymatt
- RAL 8004brick redgloss
- RAL 8019dark browngloss
- RAL 8019dark brownmatt
- RAL 9002off-whitegloss
- RAL 9005blackgloss
- RAL 9005blackmatt
- RAL 9006silvergloss
Thickness 0.6 mm
- RAL 3009dark redgloss
- RAL 7016anthracite greygloss
- RAL 8004brick redgloss
- RAL 8019dark browngloss
- RAL 9002off-whitegloss
- RAL 9005blackgloss
- RAL 9006silvergloss
Shades on screen may differ from the real colour. Other shades can be supplied to order.
Felt
Felt for every roofing
Felt bonded to the underside of the sheet regulates humidity in the room below and prevents dripping and damage from condensation on cold metal.
It also insulates against heat and sound, resists bacteria, is rated B1 to DIN 4102 and stays firmly bonded to the sheet as it ages.
Is LUX right for your roof?
Send us the dimensions of your roof and the colour you like; we will prepare an offer with the flashings and gutters to match.