Insulated panels
Insulated roof and facade panels
Panels are a modern, efficient and good-looking way to cover all kinds of buildings: they insulate well, are mechanically stable and quick to install. We supply them in several thicknesses, colours and facings to fit your project.
Two families
Roof panels and facade panels
Insulation
Three cores, many thicknesses
The right core is key to the thermal, fire and sound protection you need.
| Core | Thicknesses | Best for |
|---|---|---|
| PUR | 15, 30, 40, 50, 60, 80, 100, 120, 150 mm | Energy efficiency at low weight, without special fire requirements |
| PIR | 30, 40, 50, 60, 80, 100, 120, 150 mm | Industrial and business buildings where fire safety matters |
| Rock wool | 60, 80, 100, 120, 150, 200 mm | Non-combustible: the strictest fire rules; very good sound insulation |
The same cores and thicknesses are available for roof and facade panels.
Lower facing
Three versions of the underside
All versions have a galvanised colour-coated steel top; they differ in the material underneath.
Sheet / sheet
The classic version with galvanised colour-coated sheet on both sides: the highest mechanical resistance and a finished look from both sides, where the underside stays visible. Common in industrial and business buildings.
Sheet / aluminium foil
Sheet on top and aluminium foil below: a lighter, more affordable panel where the underside is not visible or exposed to mechanical loads. Recommended for warehouses, canopies and similar buildings.
Sheet / PVC (fibreglass, PRVF)
A reinforced PVC underside developed for agriculture, barns and aggressive environments. It resists ammonia, moisture and abrasion and stands up to the vapours and humidity typical of such rooms.
Colours
Five standard RAL colours
High-quality galvanised, colour-coated sheet protected by a zinc coating, in thicknesses of 0.5, 0.6 and 0.7 mm to suit the mechanical requirements and use of the building.
- RAL 3009dark redgloss
- RAL 7016anthracite greygloss
- RAL 8019dark browngloss
- RAL 9002off-whitegloss
- RAL 9006silvergloss
Panels in other RAL shades and sheet thicknesses can be supplied on request.
In stock
Popular panels ready for quick delivery
Roof panels sheet / sheet and sheet / aluminium foil in lengths of 5, 6, 7 and 8 m in RAL 7016 and RAL 8019.
Facade panels with a visible joint and linear profiling, in lengths of 5, 6, 7 and 8 m in RAL 7016 and RAL 9002.
Panels in stock have a 30 mm PUR core and come from the well-known Italian manufacturer Marcegaglia. We can cut them to the exact length you need.
Manufacturers
Recognised panel manufacturers
We work only with recognised manufacturers of insulated panels such as Marcegaglia, Arcelor, Alternativa and BRUCHA. That gives steady quality, a wide choice and quick delivery, and lets us find the best option for each project with different suppliers.
Looking for the right panel?
Every project has its own requirements. Tell us yours and we will find the most suitable option for your building.