Insulated panels

Insulated facade panels

Insulated facade panels are a modern, practical and finished way to clad all kinds of buildings. They insulate well, resist mechanical loads and are quick to install, in several core types, thicknesses, colours and profiles.

Request a quote Insulated panels

Insulated facade panel with linear profiling

Insulation

PUR, PIR or rock wool

The right choice of insulation is key to the thermal, fire and sound protection of the building.

PUR (polyurethane foam)
The most widely used core: excellent thermal insulation at low weight. A rigid foam injected between the two facings. Ideal where energy efficiency matters and there are no special fire requirements. Thicknesses: 15, 30, 40, 50, 60, 80, 100, 120 and 150 mm.
PIR (polyisocyanurate)
An upgrade of PUR with better fire resistance, even better insulation and higher temperature resistance, for industrial and business buildings where fire safety matters. Thicknesses: 30, 40, 50, 60, 80, 100, 120 and 150 mm.
Rock wool
A natural material made from volcanic rock: very good thermal and sound insulation and the highest fire resistance. Non-combustible, for buildings with the strictest fire rules. Thicknesses: 60, 80, 100, 120, 150 and 200 mm.

Versions

Three lower facings

All versions have a top of galvanised colour-coated sheet; they differ in the material of the underside, so you can match the panel to the use, the environment and the budget.

Sheet / sheet
The classic version with galvanised colour-coated sheet on both sides: the highest mechanical resistance and a finished look from both sides, where the underside stays visible. Common in industrial and business buildings.
Sheet / aluminium foil
Sheet on top and aluminium foil below: a lighter, more affordable panel where the underside is not visible or exposed to mechanical loads. Recommended for warehouses, canopies and similar buildings.
Sheet / PVC (fibreglass, PRVF)
A reinforced PVC underside developed for agriculture, barns and aggressive environments. It resists ammonia, moisture and abrasion and stands up to the vapours and humidity typical of such rooms.

Colours

Five standard RAL colours

High-quality galvanised, colour-coated sheet protected by a zinc coating, in thicknesses of 0.5, 0.6 and 0.7 mm to suit the mechanical requirements and use of the building.

RAL 3009dark redgloss
RAL 7016anthracite greygloss
RAL 8019dark browngloss
RAL 9002off-whitegloss
RAL 9006silvergloss

Panels in other RAL shades and sheet thicknesses can be supplied on request.

In stock

Ready for quick delivery

For quick deliveries we keep the most popular facade panels in stock: panels with a visible joint and linear profiling, in lengths of 5, 6, 7 and 8 m, in RAL 7016 and RAL 9002.

They have a 30 mm PUR core and come from the well-known Italian manufacturer Marcegaglia. We can cut them to the exact length you need.

Manufacturers

Recognised panel manufacturers

We work only with recognised manufacturers of insulated panels such as Marcegaglia, Arcelor, Alternativa and BRUCHA. That gives steady quality, a wide choice and quick delivery, and lets us find the best option for each project with different suppliers.